Printronix L1524 Manuel d'utilisateur télécharger pdf (Page 96)

3–56 Configuring the Printer

19. Get the name of the compressed emulation file on the diskette by typing

the following at the DOS prompt:

DIR A: <Return>

(If the diskette is in drive B, type B: <Return>)

The file name of the compressed file on the diskette takes the form

part_num

.zip, for example 123456.zip.

20. At the DOS prompt type:

A:\PKUNZIP A:\

part_num

where

part_num

is the six digit number you noted in the previous step.

(Replace A: with B: if you are using the B drive.)

21. The PKUNZIP® program will execute, and the following message will

appear on the computer screen:

Insert disk #1 – Press a key when ready

22. Remove the diskette in the disk drive and insert the diskette labeled

Disk 1 of 2 (or 1 of 3, etc.)

23. Press the <Return> key on the computer. After the file is expanded to

the hard drive, the following message will appear on the computer

screen:

Insert disk #2 – Press a key when ready

24. Remove the diskette in the disk drive and insert the diskette labeled

Disk 2 of 2 (or 2 of 3, etc.)

25. Press the <Return> key on the computer. If there are only two diskettes

for the emulation, you will be returned to the DOS prompt when the

expansion is complete. If there are more than two diskettes, you will be

asked to insert disk #3 and press a key. Continue in this manner until

you have inserted all of the emulation diskettes and the DOS prompt

has returned.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 147 148

Pas de commentaire

Printronix L1524 Manuel d'utilisateur Page 96