Printronix SL5000r RFID Smart Label and Thermal Printers Manuel d'utilisateur télécharger pdf (Page 346)

346

Appendix A

Media

Table 19. Media - General Information

Type: Roll-fed, die-cut continuous or fanfold labels, tags or tickets;

most direct thermal or thermal transfer materials.

Supply Roll: 8 inch (203 mm) maximum diameter on 1.5-inch (37.5 mm) to

3-inch (76 mm) diameter cores.

Internal Rewinder: Accepts up to a 5-inch diameter roll of label backing.

Label Material: Thermal transfer plain-coated papers, vinyl, Mylar, metallized

paper, non-woven fabric, fine woven fabric, thermal-visible light

scannable paper, infrared scannable paper, thermal ticket/tag

stock, thermally-sensitive plastic stock.

Media Sensing: Horizontally moveable sensor assembly. When set to Gap, the

assembly detects die-cut labels on liner media and notches and

holes in tag stock. When set to Mark, it senses a black mark on

the underside of tag or label stock. When set to Advanced Gap, it

detects liner gaps between die cut labels with a dark

background. When set to Advanced Notch, it detects notches or

holes that interrupt a dark or black area on the underside of the

media. When set to Disable, it senses no label indicators or

ignores all existing label length indicators on the installed media.

Label Taken Sensor: Detects when a printed label is at the printer exit throat. Used

only for Tear-Off and Peel-Off Media Handling modes.

Automatic Label Peel-Off: Peels and presents label to the operator, one at a time.

Automatic Label Peel-Off is supported only when the internal

rewinder is installed. (The internal rewinder is a factory- or

field-installed option.)

1 2 ... 341 342 343 344 345 346 347 348 349 350 351 ... 393 394

Pas de commentaire

Printronix SL5000r RFID Smart Label and Thermal Printers Manuel d'utilisateur Page 346