Printronix SL5000r RFID Smart Label and Thermal Printers Manuel d'utilisateur télécharger pdf (Page 140)

140

Chapter 3 CALIBRATE CTRL

Auto Calibrate is completed successfully when the Sensed Distance

displayed correctly matches that of the installed media. When Gap is

selected, the Sensed Distance should match the length from the trailing edge

of one gap to the trailing edge of the next gap (one label + one gap). When

Mark is selected, the Sensed Distance should match the length from the

leading edge of one black mark to the leading edge of the next black mark.

Auto Calibrate supports label lengths up to 24 inches.

Media Profile

This feature provides a graphical printout showing the relationship of the

Paper Out Threshold and the Gap/Mark Threshold. The profile printout

assists you in setting the thresholds for difficult media. This includes pre-

printed labels, and labels with poor gap/media dynamic range.

When selected, the printer will advance media and print the media profile

along the length of each label. The printer will continue to print the profile until

you press ↵.

The factory default is Print Profile.

Sensed Distance

This value (in inches) represents the distance that was sensed between the

TOF of one label to the TOF of the next label. With gapped media installed,

the distance equals the physical label length plus one gap, notch, or hole

(trailing edge of one gap, notch, or hole to the trailing edge of the next gap,

notch, or hole). With black mark media installed, the distance equals the

leading edge of one black mark to the leading edge of the next. This value is

automatically determined only after successful completion of Auto or Manual

Calibrate and cannot be changed manually.

The factory default is 0.00 inches.

Gap/Mark Thresh

This menu item sets a value that, when exceeded by the output of the media

sensor, is recognized by the printer as a gap (or black mark). When Auto or

Manual Paper Calibrate is performed, the value displayed is equal to the

gap/mark threshold value set by this procedure. If running the procedure does

not provide a reliable Top-Of-Form detection, e.g., when using unusual

media, the Gap/Mark Thresh value can be manually set to the desired value.

The range is from 000 to 255, and the factory default is 171.

Paper Out Thresh

This menu item selects a value that, when exceeded by the output of the

media sensor, is recognized by the printer as a paper out condition. When

Auto or Manual Calibrate is performed, the value displayed is equal to the

paper out threshold value set by this procedure. If running the procedure does

not provide a reliable paper out detection, e.g., when using non-standard

media, the Paper Out Thresh value can be manually set to the desired value.

The range is from 000 to 255, and the factory default is 180.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 393 394

Commentaires sur ces manuels

Pas de commentaire

Printronix SL5000r RFID Smart Label and Thermal Printers Manuel d'utilisateur Page 140

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Printronix SL5000r RFID Smart Label and Thermal Printers